VTech IP811 - Manual (Page 10)

9
Ad
vanced Operation
Headset Operation
Your IP 811 handset is equipped with a 2.5mm headset jack for use with an optional ac-
cessory headset for handsfree conversations. If you choose to use the headset option, you
must obtain an optional accessory headset that is compatible with the IP 811.
To purchase a headset, visit us on the web at shop.vtechcanada.com or call VTech
Customer Service at 1-800-267-7377.
Once you have a compatible 2.5mm headset, locate the headset jack on the IP 811 handset.
Connect the plug on the headset cord to the jack (under a small rubber flap) on the cordless
handset. The plug should fit securely. Do not force the connection.
NOTE:
• Whenever a compatible headset is conn-
ected to the cordless handset, the micro-
phone on the handset will be muted. This
is done to limit the effect of background
noise.
• When a compatible headset is connected
to the cordless handset, your speaker-
phone feature will be disabled. To use
your speakerphone feature, simply dis-
connect the headset from the handset.
Belt Clip
The IP 811 is also equipped with a detachable
belt clip. Align the pins on the inside edge of the
clip with the notches on the sides of the handset.
The belt clip should snap securely into place.
Do not force the connection.
Headset Operation
811.vcan.om.eng.indd 9 10/27/05 11:16:29 AM