Vizio P42HDTV10A - Manual (Page 80)

CONFIDENTIAL – DO NOT COPY Page 8-48
File No. SG-0184
Data for any Write burst may be concatenated with or truncated with a subsequent Write
command. In either case, a continuous flow of input data can be maintained. The new Write
command can be issued on any positive edge of clock following the previous Write command.
The first data element from the new burst is applied after either the last element of a completed
burst or the last desired data element of a longer burst which is being truncated. The new Write
command should be issued x cycles after the first Write command, where x equals the number of
desired data element pairs (pairs are required by the 2n prefetch architecture).
Write Command