WHP Wireless WHP-1100 - Manual (Page 25)

Using the WLAN Management System
Once the Outdoor AP is connected to an Ethernet network, a network administrator
can connect to it from any PC on the same network via the WLAN Management
System (WMS) utility.
The WMS utility is a Windows-based SNMP management tool allowing network
administrators to remotely configure and monitor the Outdoor AP through both an
Ethernet and a wireless connection. To launch the WMS utility:
step 1. Click Start > Programs > WLAN > Management System > WLAN
Management System. The main WMS window will open. Click
Start/Start Hosts View.
Auto-Discovery
This discovery protocol can discover all compatible wireless operating devices
connected to the Ethernet LAN within the same subnet.
step 1. Click the Auto Discovery icon (a pair of binoculars) on the left side of the
Hosts View window. All working compatible devices will automatically
be discovered.
step 2. Select one of the wireless devices on the list. The utility buttons on the
left toolbar will be enabled.
step 3. Right-clicking on a particular device will open a popup menu offering the
same functions as the toolbar (Figure 10).
Outdoor Access Point 19