WHP Wireless WHP-1100 - Manual (Page 28)

Configuration
step 1. For configuration, select the Outdoor AP on the Hosts View window.
step 2. Right-click the Outdoor AP to open the popup menu (Figure 10).
step 3. Click Config to go to the configuration window (Figure 12).
Figure 12. Config window — IP panel
Config Window – IP Panel
IP Address Setting: The Outdoor AP is a DHCP client. It will automatically ask the
DHCP server to assign it an IP address. An administrator can assign a fixed IP to an
Outdoor AP by unchecking the Obtain IP Settings Automatically (by DHCP) box
(Figure 12). You may also configure a subnet mask and add a default gateway.
If you assign a fixed IP address to an Outdoor AP, make sure that all Outdoor APs
within the same network have the same TCP/IP subnet address.
Obtain IP Settings
Automatically (by
DHCP) Automatically retrieves an IP address for the Outdoor AP
from a Dynamic Host Configuration Protocol (DHCP)
server. This option is enabled by default.
IP Address Manually assigns an IP address to the Outdoor AP.
22 Outdoor Access Point