Adjusting the oven temperature control, Press and hold bake pad for 5 seconds, Set new offset temperature – Whirlpool RBS277PD User Manual

Page 18

Advertising
background image

18

U S I N G Y O U R O V E N

Adjusting the oven temperature control

Although your new oven is properly adjusted
to provide accurate temperatures, it may
cook faster or slower than your old oven.

If, after using the oven for a period of time,

you are not satisfied with the baking/roasting
results, you can change the offset tempera-
ture by following these steps:

NOTE:

These examples are for double

upper ovens only. Other ovens may look
slightly different.

1. Press and hold Bake pad for

5 seconds.

The display will show the current offset
temperature, for example “0”, if you have
not previously adjusted the temperature.

2. Set new offset temperature.

Press

to raise the temperature or

to

lower the temperature in 10°F amounts.
You can set the temperature change to
as low as -30°F or as high as +30°F. A
minus (-) sign will appear before the
number when decreasing the tempera-
ture setting to show the oven will be
cooler by the displayed amount. There is
no sign in front of the number when
increasing the temperature setting.

NOTE:

DO NOT measure oven temperature

with a thermometer. Opening the oven door
will lower the oven temperature and give you
an inaccurate reading. Also, the thermom-
eter temperature reading will change as your
oven cycles.

UPPER

OVEN

PRESS

YOU SEE

F

BAKE

(factory setting of “0”)

to select
oven (for
double
ovens)

PRESS

F

BAKE

PRESS

YOU SEE

(example when making oven
10°F [or 5°C] hotter)

TEMP

BAKE

Advertising