Whistler BT3200 - Manual (Page 11)

Connecting the headset with cell phone.
1). Activate the Bluetooth function of you phone and start searching for other phones
in our environment. If necessary, make use of your mobile phone manual. Please
make sure that all other Bluetooth devices in your environment as well as all
channels of other headsets are switched off.
2). After the search function of your cell hone has been activated, activate your
Bluetooth headset by pressing the [-] key, from the power off status, for
approximately 7 seconds until the red LED starts flashing rapidly.
3). On most cell phone’s displays, you will see the name of the headset now (Whistler
200/300). After you choose the headset, you will be asked for a password. This
will be 0000 in most cases. Alternatively, try 1234 or 1111. If these passwords do
not work, please consult your cell phone manual.
4). After entering the password, connect the cell phone to the headset by following
the directions provided by your cell phone or cell phone owner’s manual.
5). Cell phone and headset are now paired. If you reactivate both units, the
connection will be automatically activated again (paired).
Play music from mobile phone
The Bluetooth headsets have Bluetooth Version 2.0 and the A2DP protocol. With this
protocol, you can hear music in stereo quality. To hear music in stereo quality from your
cell phone depends on whether or not your cell phone has the A2DP protocol too.
Otherwise, you will hear the music in mono quality only.
1). Connect your cell phone with music to you Bluetooth headset as previously
described.
2). Activate the music on your cell phone. The volume can be adjusted with the [+] &
[-] keys. With the Whistler BT2000/3000 models, you can adjust the music volume
separately from the intercom volume.
3). To stop and start the music, press the Mute key on the headset.
4). If cell phone and headset have too much distance between each other, but get
together within 30 minutes, they will connect again automatically. After 30
minutes have passed, you have to switch off/on your headset can cell phone to
connect them again. If this does not work, please pair both units again.
Pairing to a Cell Phone Pairing to a Cell Phone
18 19