Wolf Appliance Company Pro 36" (914) Wall Chimney Hood PWC362418 - Manual (Page 7)

7
Dimensions in parentheses are in
millimeters unless otherwise specified.
Unit dimensions may vary by ± 1 / 8 " (3).
Planning Information
Pro 36" (914) Wall Chimney Hood
M O D E L P W C 3 6 2 4 1 8 ( R )
W O L F B L O W E R A S S E M B L I E S
A ventilation system must include a blower
assembly. Wolf ventilation hoods are shipped
without the blower assembly. An internal, in-line
or remote blower assembly must be selected to
accommodate the cooking appliance, CFM
requirements and homeowner preferences.
Internal, in-line and remote blower assemblies
are available as sales accessories through your
Wolf dealer.
IMPORTANT NOTE: Use only a Wolf blower
with all Wolf ventilation products.
Internal blowers are mounted inside the hood
canopy. In-line blowers are mounted in between
the hood and the exterior of the home. Remote
blowers can be mounted on the roof or in some
cases, on an exterior wall. Refer to the illustra-
tions below for dimensions of Wolf in-line and
remote blowers.
Pro ventilation recommendation charts on the
following page provide minimum CFM recom-
mendations according to the cooking appliance
and ventilation hood used and blower options
for each specific Pro wall chimney hood.
24 1/2 "
(622)
15 1/2 "
(394)
28 1/4 "
(718)
20 3/4 "
(527)
24 3/4 "
(629)
14"
(356)
4 3/4 "
(121)
10" (254)
Diameter
14 3/4 "
(375)
29 1/2 "
(749)
29 1/2 "
(749)
18" (457)
22"
(559)
10 1/8 "
(257)
7 1/4 "
(184)
10"
(254)
10" (254)
Diameter
14 3/4 "
(375)
29 1/2 "
(749)
29 1/2 "
(749)
21" (533)
25"
(635)
10 3/8 "
(264)
7 1/4 "
(184)
10"
(254)
10" (254)
Diameter
18"
(457)
22"
(559)
24 7/8 "
(632)
12"
(305)
18"
(457)
8"
(203)
In-line BLOWER-110IL
Remote BLOWER-90REM Remote BLOWER-120REM Remote BLOWER-150REM