Westinghouse LTV-27w6 HD - Manual (Page 13)

3
INSTALLATION
11
English
SIDE CONNECTORS
1. YPbPr2 / Audio2 (Right / Left)
Connect the component video to an external video device
such as a DVD or gaming system.
2. YPbPr1 / Audio1 (Right / Left)
Connect the component video to an external video device
such as a DVD or gaming system.
3. S-Video
Connect to an external video device such as a VCR. Audio
(R/L) input supports either S-Video or AV input.
4. AV Video / Audio (Right / Left)
Connect the composite video to an external video device
such as a VCR. Audio (R/L) input supports either S-Video or
AV input.
5. DVI-HDCP / Audio (Right / Left)
Connect to an external DVI-HDCP device such as a DVD,
cable/satellite receiver, or computer.
6. HDMI / Audio (Right / Left)
Connect to an external HDMI device such as a DVD or
cable/satellite receiver. To use analog audio for HDMI, open
the OSD menu, and under the Audio menu, use the left/right
arrow key to change HDMI to Analog.
7. Audio Out (Right / Left)
Connect this output to an external audio amplifier.
8. Audio-In (VGA)
Using a 3.5mm mini-jack cable, connect to the Audio out
(Green) on a computer.
9. VGA
Using a 15-pin VGA cable, connect to a computer.
10. Service Port
Factory use only.
11. ANT (RF-input)
Connect to the antenna or cable service.
12. AC-IN (Power)
Connect the power cord from AC-IN to a power source.