Setup problems, Troubleshooting wilife user guide 103 – WiLife V2.1 User Manual

Page 116

Advertising
background image

Troubleshooting

WiLife User Guide

103

Installation Problem

Solution

Camera suction cup comes

free from the window

Clean the window to ensure an airtight fit.

With your fingertip, place a very light layer of vegetable or olive oil around the edge of

the suction cup.

Always use the strain relief mini-suction cup for added safety by attaching it to the

glass and cable.

Setup Problems

Setup Problem

Solution

After a few minutes or even

seconds Command Center

drops my camera

On older machines (pre 2001), some USB sockets may be underpowered or

incompatible with the USB 1.1 standard. Upgrade your computer by adding a USB 2.0

card or hub.

Check your firewall settings. Some firewalls close communications after a few seconds

of operations.

The cable connecting the

camera to the power supply is

too short

You may purchase a longer Ethernet cable or Ethernet Cable Coupler at our online

accessory store.

Purchase a standard CAT5e Ethernet cable from you local computer accessory retailer

(up to 80 feet). (Note: crossover CAT5 cables will not work with our system.)

My primary camera is shown

in the second camera

position

From the Live Mode, click on a video panel and drag it to the panel you want it to

display. This rearranges camera order.

My cameras are recording too

frequently

Reduce camera motion Sensitivity on the Setup>Recording dialog.

Reduce the size or number of motion zones.

My camera is not following my

recording schedule

Ensure the camera ON/OFF button on the main screen is ON.

Verify that your computer clock is correct.

Check your recording schedule to validate the days-of-the-week and times. Remember

12AM is midnight, not noon.

Check your recording schedules to ensure you do not have overlapping schedules that

conflict.

I do not know my SMTP

account information

Contact your e-mail provider for details on connecting to their SMTP server. You can

usually find this information on your e-mail provider’s Internet support page.

Create a new e-mail account using gMail or other e-mail services that supports SMTP

(www.gmail.com).

My alert e-mails are being

rejected because of size

Most e-mail providers limit the maximum size of e-mails and limit the cumulative size of

all e-mails in your system.

Delete or archive outdated e-mails from your system.

Contact your e-mail vendor to have them configure your account for larger e-mail

messages.

Select a smaller alert message type. The “Send Text Message” is smallest and the

“Send Video Frame” e-mail is usually about 50KB.

I am getting too many e-mail

messages

Command Center sends an e-mail alert when a camera detects motion and the length of

the motion meets or exceeds your settings. To reduce the number of messages, you

can:

Reduce recording events by reducing motion sensitivity or changing motion zones on

the Setup>Recording dialog.

Increase the Minimum Motion time on the Setup>E-mail dialog.

Increase the Maximum Frequency time on the Setup > E-mail dialog.

Advertising