Online connection section descriptions – WiLife V2.1 User Manual

Page 76

Advertising
background image

Setting System Options

User Guide

63

connected via “Direct Mode.” In Direct Mode, there is no

time limit. You can view a video feed for any length of time.

Cell phone viewing is limited to 3 minutes.


There are answers to more questions available in our Knowledge Base/FAQ (

http://wilife.custhelp.com/cgi-

bin/wilife.cfg/php/enduser/std_alp.php

) and Tips & Tricks

(

http://www.wilife.com/Support/TipsAndTricks.aspx

)

Online Connection Section Descriptions

Setup > Online tab > Online Connection Section


The Online Connection section of the Online

tab screen allows you to check the status of

your online connection and streaming

video. The following screen shot is an

example of this feature.

O

NLINE

S

TATUS

I

NDICATORS

The Online Status field specifies whether or not you’re currently connected to our WiLife servers. For Online

status, there are four primary indicators: Disconnected, Attempting Connection, Connected, and Disconnecting.

Indicators

Descriptions

Disconnected

Command Center is currently disconnected from remote viewing.

Attempted Connection

Command Center is attempting to enable remote viewing.

Connected

Command Center is connected and available for remote viewing.

Disconnecting

Command Center is disconnecting from remote viewing.


There are also indicators that will display in the event of an error. The following table lists these indicators and

describes the meaning of each.

Indicators

Descriptions

Unknown Site

Command Center has attempted to register cameras without first registering the

site.

Account Already Exists

The specified remote viewing account already exists. Please select another

account.

Account Not Verified

This WiLife remote viewing account has not been verified. Please check your email

to verify this account.

Account Unknown

Unknown remote viewing account. Please verify that your email address and

password are correct, and remember that the password is case sensitive.
See Knowledge Base topic WiLife Online Setup for more information.

Data Error

Command Center cannot connect to WiLife at this time. Please try again later. If

this error persists, contact your network administrator. Possible causes include

firewall software, antivirus software, or a virus. Make sure you have installed all

updates and patches and that your firewalls are configured to allow Werks to

access the Internet.
See the Knowledge Base topic WiLife Online Data Error

Advertising