Whirlpool SF385PEG - Manual (Page 21)

21
NOTE: Make sure the clock is set to the correct
time of day. (See “Setting the clock” in the “Using
Your Range” section.)
1. Press AUTO CLEAN.
This will automatically set a 3 1 ⁄
2
-hour
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1 ⁄
2
hour before the cycle is over.
2. Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3
1 ⁄
2
hours, use the hour and minute
pads to set the cleaning time you want. Press
the “up” (s) or “down” (t) pad(s) until a time
between 2
1 ⁄
2
-4 1 ⁄
2
hours shows on the display.
• Use 2 1 ⁄
2
hours for light soil.
• Use 3 1 ⁄
2
-4 1 ⁄
2
hours for average to heavy soil.
3. Start the oven.
The door will lock as soon as you press
START/ENTER.
4. After Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures:
LOCK’D goes off and the door unlocks.
5. After the oven cools to room temperature, wipe
off any residue or ash
with a damp cloth or
sponge. If needed,
touch up spots with a
mildly abrasive cleanser
or cleaning sponge.
START
ENTER
5 SEC
S
ETTING THE CONTROLS
PRESS YOU SEE
AUTO
CLEAN
CLEAN TIME
PRESS YOU SEE
HR MIN
CLEAN TIME
(example shows 4 1 ⁄
2
-hour
cleaning time)
PRESS YOU SEE
HEAT LOCK'D CLEAN TIME
ON
CLEAN
YOU SEE
USING THE SELF-CLEANING CYCLE
continued on next page