Disc operation, Basic operation, Selecting a track/chapter – Yamaha DVD-C961 User Manual
Page 21: Searching backward/forward, Selecting a track/chapter 1, Searching backward/forward 1
17
En
Disc Operation
Eng
lish
y
• If the prohibited icon (
) appears on the TV
screen when a button is pressed, the function for
that button is not available on the current disc or
at the current time.
• Unless stated otherwise, all operations described
here are carried out using the supplied remote
control.
• Depending on the disc, some operations may
operate differently or be restricted. Refer to the
instruction supplied with the disc.
Do not push on the disc tray or put any objects other
than discs on the disc tray. Doing so may cause this
unit to malfunction.
1
Make sure this unit is turned on.
2
Press
on the front panel to open the
disc tray.
3
Place the discs in the disc tray with the
printed side up.
4
Press
again to close the disc tray.
➜ After recognizing the disc, this unit
starts playback automatically.
•
If you press
PLAY (
3
)
when the disc
tray is open, the disc tray closes and
playback starts automatically.
5
To play back a specific disc directly, press
DISC 1-5
.
•
You can also use the
DISC SKIP
button
to play back a specific disc directly.
•
Press
PLAYXCHANGE
on the front
panel to open the disc tray and reload/
unload discs without interrupting
current disc playback.
•
When the disc tray is opened, press
p/
e, ,
PLAYXCHANGE
or
DISC 1-5
on the front panel to close
the disc tray automatically.
6
To pause playback, press
PAUSE (
8
)
during playback.
➜ Playback is paused and the sound is muted.
7
To resume normal playback, press
PLAY (
3
)
.
8
To stop playback, press
STOP (
7
)
.
Selecting a track/chapter
1
Press
SKIP (
l
22 /
33
l
)
or use the
numeric buttons (0-9)
to select a track/
chapter number.
2
During repeated playback, press
SKIP (
l
22 /
33
l
)
to replay the same
track/chapter.
Searching backward/forward
1
Press and hold
SKIP (
l
22 /
33
l
)
for about
two seconds or press
2
/
3
.
2
While searching, press
SKIP (
l
22 /
33
l
)
or
2
/
3
repeatedly to select the desired
speed (5 steps).
3
To resume normal playback, press
PLAY (
3
)
.
• The
2
/
3
button may not be available with
some discs.
• For MP3 and WMA, the search function allows
you to search the track currently being played.
Note
Basic operation
Notes
Disc Operation