Yamaha DVD-C961 - Manual (Page 11)

7
En
Functional Overview
Eng
lish
q
AUDIO DIRECT
Turns off the video output during audio disc
(CD/DVD-Audio/SA-CD) playback in order to
improve audio quality. Press again to turn on the
video output.
This function is not available for HDMI output.
In the AUDIO DIRECT mode, the front panel
display dims to “MODE 2”.
• You can turn on or off the AUDIO DIRECT mode
only when playing back CD, DVD-AUDIO, or
SA-CD disc.
• The AUDIO DIRECT mode is canceled when
you set this unit to the standby mode.
w
Numeric buttons (0-9)
Selects numbered items in the currently
displayed menu.
e
PAGE
Selects the DVD-Audio still picture (see
page 24).
r
STANDBY ( )
Sets this unit to the standby mode.
t
ANGLE
Selects the DVD camera angle (see page 23) and
scan effect for JPEG (see page 26).
y
ZOOM
Enlarges or lessens the video image (see
pages 22 and 26).
u
SKIP ( l
22 / 33
l )
Moves to the previous (top of the currently
playing)/next chapter or track.
Searches backward/forward (see page 17).*
i
PAUSE ( 8 )
Pauses playback temporarily.
Frame-by-frame playback.
o
REPEAT
Accesses or exits from the repeat mode (see
page 18).
p
A-B
Repeats a specific segment (see page 18).
a
ON SCREEN
Accesses or exits from the on-screen display
(OSD) menu during playback (see page 20).
s
SETUP
Accesses or exits from the setup menu of this
unit (see page 28).
d
SOUND MODE
Selects a sound mode: stereo, virtual surround or
multi-channel.
Changes the SA-CD playback area (see
page 24).
f
DIMMER
Selects from three different levels of brightness
for the front panel display:
MODE 1: 70% brightness
MODE 2: 40% brightness and all the indicators
on the front panel turn off.
NORMAL: 100% brightness
g
DISC 1-5
Selects and directly plays back the preferred disc
(see page 17).
h
DISC SKIP
Selects another disc (see page 17).
* Press and hold the button for about two seconds.
Notes