Yamaha DVD-C961 - Manual (Page 34)

30
En
Setup Menu
Programming discs
You can play back discs in the desired order
by programming the discs to be played. You
can store up to 5 discs.
1 Select [PROGRAM] in “GENERAL
SETUP PAGE”.
2 Press 3 to select [FDS], and then press
ENTER .
➜ The input menu appears on the TV
screen.
■ To input your favorite discs
3 Use the numeric buttons (0-9) to enter a
valid disc number.
4 Use 2 / 3 / 5/ to move the cursor to the
next position.
5 Repeat steps 3 - 4 to input another disc
number.
■ To remove a disc
6 Use 2 / 3 / 5/ to move the cursor to the
disc you want to remove.
7 Press 0 on the numeric buttons (0-9) to
remove this disc from the program menu.
■ To start program playback
8 Use 2 / 3 / 5/ to highlight [START] on
the program menu, and then press ENTER .
➜ Playback starts for the selected tracks
or discs in the programmed sequence.
■ To exit from program playback
9 Use 2 / 3 / 5/ to highlight [EXIT] on the
program menu, and then press ENTER .
y
Program playback is canceled once tracks/discs on
the menu are played back to the end.
OSD language
This menu contains various options for the on-
screen display (OSD) language. For details,
see “Setting the OSD language” on page 16.
Turning the screen saver on/off
This function is used to turn on or off the
screen saver. You can prevent the display from
burning by turning on the screen saver.
• Select [SCREEN SAVER] in “GENERAL
SETUP PAGE”.
ON
Select this to turn off the TV screen when disc
playback is stopped or paused for more than
15 minutes.
OFF
Select this to disable the screen saver function.
Setting the sleep timer
This function automatically sets this unit to
the standby mode after a certain elapsed
period.
• Select [SLEEP] in “GENERAL SETUP
PAGE”.
15, 30, 45, 60 MINS
Select one to set the sleep timer function.
OFF
Select this to cancel the sleep timer function.
FAVOURITE DISC SELECTION
(1) DISC: _
(2) DISC: _
(3) DISC: _
(4) DISC: _
(5) DISC: _
START EXIT