Yamaha DVD-C961 - Manual (Page 37)

33
En
Setup Menu
Eng
lish
OFF
Select this to disable to set [SPEAKERS].
In this setting, [SPEAKERS] is automatically
set to the following options:
FRONT SPEAKER/CENTER SPEAKER/
SURROUND SP: LARGE
SUBWOOFER: ON
SPEAKERS VOLUME: 0dB.
SPEAKERS DELAY: 0 MS.
Setting the speaker channels
You can set the sizes, volume levels and delay
times for individual speakers.
• Select [SPEAKERS] in “AUDIO SETUP
PAGE”.
FRONT SPEAKER, CENTER SPEAKER,
SURROUND SP
Set the sizes for front/center/surround
speakers.
OFF ([CENTER SPEAKER] and [SURROUND
SP] only)
Select this when no speakers are connected.
LARGE
Select this if the connected speakers can
reproduce low frequency signals below 120 Hz.
SMALL
Select this if the connected speakers cannot
reproduce low frequency signals below 120 Hz.
SUBWOOFER
Select on or off for the subwoofer.
ON
Select this if a subwoofer is connected.
OFF
Select this if no subwoofer is connected.
SPEAKERS VOLUME
Adjust the volume level for individual
speakers.
Control range: –12dB to 0dB
SPEAKERS DELAY
Adjust the delay time in relation to the
listening position/distance for center and
surround speakers.
Control range: 0 MS to 15 MS
• When [SPEAKER SETUP] is set to [OFF], you
cannot select [SPEAKERS].
• When [FRONT SPEAKER] is set to [SMALL],
[SUBWOOFER] is automatically set to [ON].
• When audio signals are output at the HDMI jack,
[SPEAKER SETUP] is automatically set to
[OFF].
y
• Use a longer delay time setting when the
surround speakers are closer to the listener than
the front speakers.
• A test tone is automatically generated to help you
judge the sound level of each speaker.
Setting the CD upsampling
You can convert your music CD to a higher
sampling rate using sophisticated digital
signal processing for better sound quality. If
you activate the upsampling function, this unit
automatically switches to the stereo mode.
• Select [CD UPSAMPLING] in “AUDIO
SETUP PAGE”.
OFF
Select this to disable CD-upsampling.
88.2kHz (X2)
Select this to convert the sampling rate of CD
to twice that of the original.
176.4kHz (X4)
Select this to convert the sampling rate of CD
to four times that of the original.
Even when you select [176.4kHz (X4)], the digital
output signals are upsampled to 88.2 kHz.
Notes
Note