Wintal PVR10 - Manual (Page 12)

12
WIN TA L P V R10HD USER M A NUA L
2.1.2 tV CoNNECtIoN - coMPonent
COMPONENT INPUT AUDIO
RCA CABLE
YPbPr CABLE
RF CABLE
Power Supply
▪ Use an RF cable to connect the TV antenna to the
ANt IN 1
input on the PVR10HD.
▪ Using a 3x RCA component lead, connect the green
Y
, the blue
Pb
and the red
Pr
connectors to the
corresponding ports on your PVR10HD and TV.
▪ For audio, using a 2x RCA lead, connect the left channel audio (WHITE) and the right channel audio (RED)
connectors to the
L
and
R
ports on your PVR10HD (next to the Y Pb Pr output ports) and the other end to
the corresponding ports on your TV.
▪ Switch to the Component source on your TV (refer to your TV manual if needed)