Wintal PVR10 - Manual (Page 13)

13
2.1.3 tV CoNNECtIoN - S-vIdeo
AUDIO S-VIDEO
RCA CABLE
S-VIDEO CABLE
RF CABLE
Power Supply
▪ Use an RF cable to connect the TV antenna to the
ANt IN 1
input on the PVR10HD.
▪ Using an S-VIDEO (S-VHS) lead, connect one end to the S-VIDEO output on your PVR10HD and the other
end to the S-VIDEO input on your TV.
▪ For audio, using a 2x RCA lead, connect the left channel audio (WHITE) and the right channel audio (RED)
connectors to the
L
and
R
ports on your PVR10HD (next to the Y Pb Pr output ports) and the other end to
the corresponding ports on your TV.
▪ Switch to the S-VIDEO (sometimes called S-VHS, YuV) source on your TV (refer to your TV manual if needed)