Waves Guitar Tone Processor GTR Solo - Manual (Page 12)

Waves GTR Solo User Guide 12
A MP C ONTROLS
A
MP T YPE controls Amp selection. Toggle through the Amps by clicking on the
text bar, or click on the arrow to the right of the text bar to reveal a drop-down list
displaying the 4 Amp groups: Bass, Clean, Drive, and High Gain. Click on an
amp group name to reveal a menu displaying the Amp types.
Range: Selection is described in section 1.1
Default: Clean
A
MP B YPASS controls Amp activation/bypass. When set to Bypass, input is routed
directly to the cabinet and mic.
Range: Bypass/On
Default: On
D
RIVE controls the drive level range.
Range: 0 to 10 (0 = -12dB, 10 = +12dB)
Default: 5 (5 = 0dB)
B
ASS controls low frequency equalization cut/boost.
Range: -5 to 5
Default: 0
M
ID controls midrange frequency equalization cut/boost.
Range: -5 to 5
Default: 0