Waves Guitar Tone Processor GTR Solo User Manual
Page 29
Waves GTR Solo User Guide
29
EQ
Frequencies: 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz
Range: +/- 12dB (Q=10)
Please note: EQ’s hidden low frequency attenuator reduces
unwanted rumble.
V
OLUME
V
OLUME
B
AR
(HI
>
LO)
controls output level. The position
between Hi and Lo determines output volume according to the
selected scaling.
S
CALE
controls the way the volume range is distributed by the
Volume bar fader.
Settings: Log or Lin
Default: Lin
M
IN
controls the Lo volume setting, or the volume that is set
when the Volume bar is in Lo position.
Range: -144dBfs – 0dBfs.
Default: -24dBfs.
M
AX
controls the Hi volume setting, or the volume that is set
when the Volume bar is in the Hi position.
Range: -144dBfs – +12dBfs.
Default: 0dBfs.
Please note: Since Max control limits the Min control, Min
value may not exceed Max value.