Winegard RC-DT09 - Manual (Page 6)

- 6 -
STEP 2: TURNING ON THE UNIT
1. While the AC adapter is connected and the unit is on standby, power will be consumed and the
power indicator is RED.
2. Press the STANDBY/ON button to turn on the unit. The power indicator is GREEN.
1. Press the MENU button on the remote
control.
2. Use the / buttons to select the CHANNEL
menu.
3. Use the button to select Channel Scan and
press the ENTER button or the button to start
scanning.
STEP 5: VIEWING THE TV CHANNEL
1. Press the MENU button on the remote
control.
2. Use the / buttons to select the OPTION
menu.
3. Use the button to select Language then
press the ENTER button or the button.
4. Use the / buttons to select English /
Español (Spanish) / Français (French).
5. Press the EXIT button on the remote control to
exit menu.
STEP 3: SETTING THE OSD LANGUAGE
DCC View
QUICK START GUIDE
Press the CH-/CH+ buttons to select a channel, or press the number button on the remote to select
the channel you want to watch.
• For channels 1 to 9, enter a one-digit channel number.
• For channels 10 to 69, enter the two-digit channel number.
Please read the Instruction Manual for further details on using the Converter Box.
STEP 4: SEARCHING FOR CHANNELS AUTOMATICALLY
IB_English.indd 6 IB_English.indd 6 2/19/2008 5:06:23 PM 2/19/2008 5:06:23 PM