Wells HD8799 - Manual (Page 8)

CLEANING INSTRUCTIONS
PROCEDURE: Clean Heated Dispenser
PRECAUTIONS: Disconnect dispenser from electric power.
Drain product and allow dispenser to cool.
FREQUENCY:
Daily or after draining product from
dispenser
TOOLS:
Mild Detergent, Clean Soft Cloth or Sponge
Long Handle Bristle Brush
1. Disconnect warmer from electric power.
Drain product and allow warmer to cool before cleaning.
2. Fill warmer with very hot water.
3. Place an appropriate container under the faucet. Use a long
handle bristle brush to stir the water while draining the hot
water from the warmer.
4. Wipe the warmer inside and out with a soft cloth or sponge
dampened with water and mild detergent.
5. Rinse the warmer inside and out with a soft cloth or sponge
dampened with clean water.
6. Wipe the tank cover with a soft cloth or sponge dampened
with water and mild detergent. Rinse with clean water.
7. If necessary, clean the faucet and drip tray (see page 8).
8. Allow all components to air dry, then reassemble.
Procedure is complete
6
CAUTION:
Electric Shock
Hazard
Do not submerge or immerse
dispenser in water.
CAUTION:
Burn Hazard
This procedure requires the
use of very hot water. Wear
protective gloves while
cleaning the warmer. Very hot
water can cause burns.
IMPORTANT:
DO NOT use steel wool, sharp
objects, or caustic, abrasive or
chlorinated cleansers to clean
the dispenser.
595
p/n
7598
2
Op
M
Heated Disp
enser