Wolfcraft 6155 - Manual (Page 42)

42
Using the Featherboard Flaps
The featherboard flaps (AE) provide
support for workpieces by holding the
pieces securely to help minimize
chatter and kickback.
Insert the featherboard flaps into the
fence or router table to hold down
workpieces.
Holding pressure can be varied by
putting long or short end of flaps in
fence or table, or by varying the
distance of flap end from the fence.
See Figure 53.
Figure 53
PUL L ON
PUS H O FF
RES ET
OU TLE TS
AE
W
AR
NI
NG