Wasp Bar Code CCD - 80SIR - Manual (Page 2)

Configuration Commands
START
To begin the configuration
procedures
END
To finish the configuration
procedures and save new
parameters in memory.
ABORT
To give up all parameters that you
have just selected.
SET
To make all parameters back to
default settings
with * in this
manual.
Configuration Procedures
START
Configuration
Interface Type Settings
Bar Code Type Settings
Other Options Setting
Abandon ?
Finish ?
ABORT
Configuration
END
Configuration
SET
All Defaults
No
Yes
Yes
Fig. 1 - Flow Chart of Configuration Procedures
No
IMPORTANT NOTICE
Each standard package contains main unit, interface
cable and user's manual. The user's manual gives you an
overall review and information about the scanner only.
For those who can do the configuration by themselves,
please contact your dealer for separate configuration
manual.
To avoid any misuse or misunderstanding, we strongly
suggest and recommend that the configuration manual
should be used by either your dealer or your software
consultant for proper set-up and custom configuration.
INFORMATION
All materials in this manual is for your information only and
are subject to change without notice. We reserve the
rights for any changes or upgrades that have to be done.
Reproduction of this manual or any part of its contents is
not allowed without the written permission of SCSC.
SOFTWARE COPYRIGHTS
All parts of the softwares implemented in the scanners are
protected by Copyright International Regulations.
COPYRIGHT ©1996,SCSC.
Safety Requirements
The scanner passes and complies with the following tests
and regulations.
A) Emission: EN55022 Class B
B) Emission: EN55022 Class B which includes
1) IEC801-2 (ESD) Class B
2) IEC801-3 (RS) Class A
3) IEC801-4 (EFT) Class B
C) CDRH class II and IEC class 2 laser product
D) UL, CSA and TUV
Released Date: July 11, 2006
Manual P/No: SCCM - 80S-01A