Wrangler JEEP P5063 - Manual (Page 8)

8
TABLE OF CONTENTS A
P5063pr-0923
2
• Plug the battery connector and charger connector together.
Push firmly to make sure the two connectors are
completely joined.
Correct Incorrect
GAP NO GAP
WARNING P R E V E N T F I R E • D o n o t b y p a s s a P o w e r W h e e l • U s e o n l y a R e d P o w e r W h e e l s • N e v e r m o d i f y t h e e l e c t r i c a l O R O P E R A T E
A-Style
Charger Connector A-Style
Battery
Connector
• Plug the charger into a standard wall outlet.
Notes:
- Use the charger only in a wall outlet. Do not plug the charger
into a ceiling outlet.
- If power flow to the wall outlet is controlled by a switch, make
sure the switch is "ON".
- The power indicator on the charger does not indicate the charge
status of your battery. The power indicator allows you to see
that there is power from the wall outlet.
• Before first time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of
your vehicle. Do not charge a battery longer than 30 hours.
• Once the battery is charged, disconnect the charger connector
from the battery connector. Unplug the charger from the wall
outlet. The battery is now charged and is ready to be installed
in your vehicle.
8
BATTERY CHARGING E
1
P5063a-0920
Power
Indicator