Wegener Communications 6420 - Manual (Page 67)

iPump 6420 User’s Manual
www.wegener.com 800070-01 Rev B Chapter 3, Page 63
Main Level Second Level Third Level Fourth Level Fifth Level
Attenuation Level 0 - 20
Headroom Level 0 -20
IP Setup LAN IP Settings Lan Addressing Mode: <
STATIC > Lan Static IP
Address
Lan Static
Netmask
Lan Static
Gateway
Lan Addressing Mode: < DHCP
>
WAN IP Settings Wan Addressing Mode: <
STATIC > Wan Static IP
Address
Wan Static
Netmask
Wan Static
Gateway
Wan Addressing Mode: < DHCP
>
HTTP Proxy Setup HTTP Proxy Enable
Mode:
DISABLE
ENABLE HTTP PROXY IP:
HTTP PROXY
PORT:
Transport In Setup Transport In Status:<
>
Current Channel Select Preset: Permament
Last Commanded
Last Success
Current
# (Stored
Channels)
Symbol Format: <QPSK>
FEC Ratio: <1/2,2/3,3/4,5/6,7/8>
Download Frequency:
Transport Data Rate:
Transport Symbol Rate:
Program Number:
Tag Site:
Done
LNB Setup LNB Type: <LOCAL
OSC.,UNIVERSAL>
LO type: (If Type= LOCAL
OSC.)
CUSTOM FREQ
STD C-BAND
US KU-BAND
EURO LOW KU-
BAND
EURO HI KU-
BAND
LO Custom Freq: (If
LO=CUSTOM FREQ)
<xxxxx.xx> MHZ
LNB DC Power (If <ON, OFF>