Wenger Battalion Diver III - Manual (Page 10)

3. For a watch with day and date display, pull out the crown of the watch to
Position 2, turn it clockwise to change the day and counterclockwise to
change the date.
4. Return the crown to the fully depressed Position 1, assuring the crown has
been further screwed down on all 200m watches.
Stopped Automatic Watches
If the watch is not worn it will wind down and stop. We suggest the following
procedure to start an automatic watch which has stopped. With the crown in
Position 1, wind the crown clockwise for approximately 30 seconds, and the
watch will start.
9