Wenger Battalion Diver III - Manual (Page 9)

Setting the Time and Date on Automatic Watches
(see Table of Contents on p.1 for other watches)
1. Pull out the crown to Position 2 (one “click” out). Rotate crown clockwise
until the date shows one day earlier than the date you want to set.
2. Pull out the crown to Position 3 (two “clicks” out). Rotate crown so the
watch hands move clockwise until the current date shows. Then set the
watch hands to the correct time. Turn the watch hands past 12 once if
you’re setting the watch for a P.M. time. Push the crown back to Position 1.
(continued next page)
8
Position 1 Position 2 Position 3