WindChaser Products PACR12 - Manual (Page 7)

There are two continuous drain features in this unit.
1.Drain (A) runs through the exhaust hose and offers continuous drainage via a built-in pump. When the cap is
on Drain (B) and the condensation tank fills to capacity, Drain (A)’s pump will automatically turn on and pump
the condensation out of the unit. If the exhaust hose is installed more than 5.9 feet above the ground,
Drain (A)’s pump will not work and the condensation must then be drained from Drain (B).
2. Drain (B) is located at the bottom of the rear of the unit and offers continuous drainage via gravity. To use
Drain (B), place a shallow pan underneath the drain outlet and remove the rubber cap. In order to avoid
spilling water while moving the unit from room to room, please drain the condensation via Drain (B) before
moving the unit. In addition, whenever you will not be using the unit for a extended period of time, such as at
the end of the season, use Drain (B) to make sure the condensation is completely drained from the unit.
CONTINUOUS DRAIN FEATURE
DRAIN (A) DRAIN (B)
MAX
5