Warwick Blue Cab 60.1 - Manual (Page 4)

5
EE
NN
GG
LL
IISS
HH
GENERAL INFORMATION
For safe and reliable operation please follow these instructions:
• DO NOT open the amplifier case! You might receive an electrical shock. For any repair refer to qualified service personnel.
• Avoid dust, excessive moisture, direct sunlight and extremely high or low temperatures.
• Safeguard the device from impact. Always place the unit on a stable and horizontal surface.
• Do not block any of the ventilation openings.
• Avoid leaving the unit near radiators or other heat producing devices.
• Internal components should be adjusted or cleaned by qualified service technicians only. Make sure no object or liquid pene-
trates the device through its cooling vents.
• Fuse must be replaced with one of the same type and value to avoid damaging the amplifier.
• the mains cable or mains switch have been damaged,
• objects or liquids have penetrated the device,
• it has been exposed to excessive moisture,
• malfunctions or abnormal operating conditions have occurred,
• the device has been dropped or the case has been damaged.
Have the device examined by a qualified service technician in the following cases:
- Make sure the unit is plugged into a socket outlet with a protective grounding connection.
- Mains plug must be accessible at any time to disconnect it from mains in case of abnormal operation.
- If the device shows any malfunction, immediately disconnect the mains cable from the mains socket.
- Use effects pedals only between the instrument and the amplifier since these devices do not meet the electrical specifications
of the effects loop.
- Unplug the unit whenever changing a fuse.
- Replace fuse only with one of the same type and value. Never bridge defective fuses.