Warwick Blue Cab 60.1 - Manual (Page 5)

EE
NN
GG
LL
IISS
HH
GETTING STARTED
1. Make sure that the mains lead is connected and all external devices (effects) are properly connected and working.
2. Set the VOLUME control (Blue Cab 15.1, 30.1, 60.1) / MASTER control (Sweet 15.3, 25.2) to zero.
3. Plug your bass guitar into the amplifier's INPUT using a shielded cable.
4. Press the POWER switch to turn the device on.
5. Switch off MUTE - the red LED will turn off. (Sweet 15.3, 25.2)
6. Turn up all volume controls of your bass guitar.
7. Adjust the GAIN control until the clip LED flashes. (Sweet 15.3, 25.2)
8. Set VOLUME control (Blue Cab 15.1, 30.1, 60.1) / MASTER contol (Sweet 15.3, 25.2) to your desired volume.
9. Use the sound controls / switches to adjust the sound as described in the respective chapters FRONT PANEL CONTROLS.
10. If necessary readjust the GAIN. (Sweet 15.3, 25.2)
6