Wenger Nomad - Manual (Page 7)

6
Setting the Analog Watch
1. To set the analog time, gently pull out the crown to Position 2.
2. Second hand will stop and digital time will flash.
3. Rotate crown so the watch hands move clockwise to the correct time.
Second Hand Alignment
To synchronize the digital with analog seconds, push in the crown to return
it to Position 1 at correct moment.
Important note:
If the analog “second”
and the digital “second”
are not synchronized, the
digital setting may not
function properly.
Position 1 (fully depressed) Position 2 (1 click out)