West Bend SOUNDSTATION VTX 1000 - Manual (Page 3)

3
• Keep the cord away from hot parts of the appliance and hot surfaces during
operation.
• Lift cover slowly, directing steam away from you.
• Set cover on hot pad, trivet or other heat protective surface. Do not set hot
cover directly on the counter, table or other surface.
• Do not place the glass cover in the microwave oven as it has a metal ring.
• Do not touch the metal probe on the plug or let it touch any surface after use, as
it will be hot.
• For household use only.
SAVE THESE INSTRUCTIONS
B
EFORE
U
SING FOR THE
F
IRST
T
IME
Please check all packaging material carefully before discarding. Many
accessory parts are contained within the packaging material.
Follow assembly directions below to properly assemble cover knob before use. Do
not use cover without cover knob properly assembled to topside of cover.
Parts Included: Tool Required:
Cover Knob Common Phillips screwdriver
Disc
Phillips screw with washer and plastic sleeve attached.
Assemble the Cover Knob:
1. Position disc and cover knob on topside of
cover aligning hole in disc and cover knob
with hole in cover.
2. Insert screw with washer and plastic
sleeve attached, through cover hole into
knob. Tighten with screwdriver until
secured. Do not over tighten to prevent
stripping of threads. Do not use cover
without cover knob attached.
Glass Cover
Grill
Base
Drip Pan
Heat Control