weber 98642 - Manual (Page 23)

23
Step 25
Complete accessory installation
You will need: work table, two accessory trays, Warm-Up
Basket, warming rack, thermometer, three tubing plugs and
a hammer.
Insert one end of the Weber Warm-Up Basket into the hole
in the right end of the lid and the other end into the slot in
the left end of the lid. Figure 34 (a).
Set the work table onto the left side rails. Figure 34 (b).
Set the accessory trays between the two frame connectors.
Figure 34 (c).
Set the warming rack into the slots at the rear of the
cooking box. Figure 34 (d).
Insert the thermometer into its holder. Figure 34 (e).
Insert tubing plugs into the ends of the frame. To fully seat
the plugs, you may have to tap them lightly with a hammer.
Figure 34 (f).
Figure 34
(a)
(d)
(e)
(f)
(b)
(c)
ƽ
CAUTION: To keep the barbecue stationary, the tabs
on the locking casters should be in the down position.