Whirlpool Petra Collection - Manual (Page 16)

AC MOTOR
PCB BOARD
MAIN ON/OPF POWER SWITCH
GEAR BOX
DC-MOTOR
MAIN SHAFT
OIL RESERVOIR
DC-PULLEY
GEAR PULLEY
DC-BELT
UPPER SENSOR
LOWER SENSOR
IMPORTANT!!!
LUBRICATE ON CIRCLED AREA
MACHINERY OIL RECOMMENDED
REMOVE SCREWS (PHILLIP)
TO OPEN THE PANEL
TRANSFORMER
FUSE
Always check your power source first
- check power cord
- check main on/off power switch
- check fuse/s
When massage is not functional :
Lubrication
1) Turn off the main power
1) Open the screws (phillip+) or Open the zippers from the front of the chair
2) Apply lubrication onto circled area
BACK VIEW FRONT VIEW
Caution
Do not apply lubrication on dc-belt
Zipper
MAIN SHAFT
If problem persists, contact your local distributor, or manufacturer with your serial number
It is strongly recommended that main shaft be lubricated in a proper way at least once a month
to ensure smooth operation
16