Welch Allyn SCANTEAM 6980 - Manual (Page 15)

10 SCANTEAM 6980 User’s Guide
Specifications
Recording Method TwoĆfrequency coherent phase (F2F),
compatible with ISO 7811
Swipe Speed
Power Requirements
Output
Operating Temperatures
Operating Humidity
Magnetic Head Life
Dimensions
Weight
Cable Length
Connector
5 to 50 in/sec (worst case with ± 12% jitter
card), biĆdirectional
Reader is lowĆpower CMOS. Power is
supplied by an external +5 VDC power pack
to operate the reader.
14 ° F to 122 ° F (Ć10 ° C to 50 ° C)
10% to 90% relative humidity
300,000 passes minimum (longer life version
available)
Length 3.94 in (10.0 cm)
Width 1.34 in (3.40 cm)
Height 1.67 in (4.24 cm)
Approximately 10.6 oz. (300 g)
From card reader to computer, approximately
5 feet (150 cm).
9 pin DĆsubminiature connector
Current Draw 60 mA @ +5 VDC maximum
Configuration Options Contains an 8 position DIP switch which
allows users to select host interface
parameters (see table on page 8) and PC
configuration utility.
Storage Temperatures Ć22 ° F to 158 ° F (Ć30 ° C to 70 ° C)
Data read from the magnetic stripe card is
transmitted to the computer according to the
Output Data Format (page 5) and the DIP
Switch settings (page 8). (RSĆ232 decodedĆout)
Note: All models of the SCANTEAM 6980 require external power. The
Configurations table on page 3 indicates which MSR models are
shipped with a power pack.