Wacom Intuos2 XD-0608-R - Manual (Page 22)

USING INTUOS2
Page 22
Contents
Index
USING THE TABLET MENU STRIP
All Intuos2 tablets have a menu strip with programmable buttons that allow you to quickly perform
common tasks. For 4x5/A6 tablets, the menu strip is printed on the overlay sheet. For 6x8/A5 and larger
tablets, the menu strip is removable, and can be written on with a pencil. The number of available buttons
depends on your tablet model. To use the menu strip, click on a button with your Intuos2 tool; the function
assigned to that button will occur.
Notes:
• When pointing to a button, the screen cursor changes to display the button number. Tablet buttons that have
been set to I
GNORED will not display the button number.
• Changes to mapping and pressure options apply only to the tool used to select the respective tablet button.
To remove the menu strip, carefully lift the overlay sheet from the left side and gently slide the
menu strip out. You can use the adhesive side of a sticky notepad sheet to “grab” the menu strip.
When removing and replacing the menu strip, take care not to bend or tear your tablet overlay.