Adding a new tool – Wacom Intuos2 XD-0608-R User Manual
Page 87
Page 87
ADDING A NEW TOOL
When a new Intuos2 tool is placed on the tablet, it automatically appears in the T
OOL
L
IST
. However, the
Wacom control panel settings must be saved before the tool is permanently added to the list. Whenever a
new Intuos2 tool is added it always uses the default settings for that tool, and not the custom settings of
other tools, even if they are identical devices.
There are several ways to add Intuos2 tools to the T
OOL
L
IST
:
•
When you use an Intuos2 tool on the tablet for the first time, it will automatically function with the
appropriate default settings. You can customize the tool by opening the Wacom control panel,
changing tab settings, and then clicking OK to save your changes and permanently add the tool to the
T
OOL
L
IST
. When you place a second Intuos2 tool on the tablet, a new tool discovered message box
appears. This reminds you to open the Wacom control panel and click OK to permanently add the new
tool to the T
OOL
L
IST
. (This message only appears if the Wacom control panel is not open. If the
control panel is open, the tool is automatically added to the list when you click OK.)
•
To manually add a new tool, select T
OOL
TO
C
USTOMIZE
... from the A
DD
pull-down menu. In the A
DD
T
OOL
TO
C
USTOMIZE
dialog box, select A
DD
N
EW
T
OOL
... and follow the prompts. Remember to click
OK or A
PPLY
in the main control panel window to save your changes.
When you select a new tool that you have added to the T
OOL
L
IST
, the appropriate tab settings for that tool
are displayed. Any changes you make to the tab settings will then apply to that tool.
To remove a tool from the T
OOL
L
IST
, select C
USTOMIZED
T
OOL
... from the R
EMOVE
menu. In the dialog box
that appears, select the tool to remove. Then select R
EMOVE
T
OOL
C
OMPLETELY
and click OK.