Whynter T-1A - Manual (Page 2)

T-1 Version 08/05 2
Introduction
This instruction manual covers the operation of versions of the Whynter
– SNO
Home Ice Machine Model T-1 and T-1A.
Please read these instructions carefully and retain them for future reference.
The appliance must be connected to a (nominally) 110V AC 60Hz. earthed
electrical supply and be protected with a fuse.
The Home Ice Machine produces 12 ice cubes every cycle of 12 to 18 minutes
approximately depending on which size of cube is selected. It is equipped with a
clear Function Display panel which includes SELECT buttons for ice cube size
selection (S
– small, M – medium and L – large), START and STOP buttons and
a WATERTANK condition monitor which gives a visual warning when the
appliance is running low on water. The unit has a separate mains electricity
ON/OFF switch in the lower right hand side panel.
It is recommended that the appliance is operated with small (S) cube size
whenever conditions permit.
The T1-A unit has a dual mode design
– “Standard” and “Direct Water Supply”
mode. In Direct Water Supply mode, the machine can be connected directly to a
mains water supply. This added function allows the water tank to automatically
refill when empty.