Wisdom Audio Wisdom & Sage Series SC-1 - Manual (Page 36)

36
Important! We strongly recommend that you leave the pulldown menus as they
are, in their default settings, since nothing you do here will change
the silkscreened labeling on the back of the SC-1. These labels
correspond to how the SC-1 is labeled; changing something here is
likely only to create confusion later.
Instead, it is easiest to use the first several channels for your theater, and then
to use any remaining channels in pairs (Surround L&R, Back L&R) for additional
stereo zones.
Similarly, you could have three 2.1 systems set up on a single SC-1. Select “6.3
Phantom” on the first screen of System Configuration, and then set up as fol-
lows:
• Zone 1 = Left, Right, Subwoofer1
• Zone 2 = Left Surround, Right Surround, Subwoofer 2
• Zone 3 = Left Back, Right Back, Subwoofer 3
Using the “6.3 Phantom” option skips the Center channel entirely, which is sim-
pler when trying to remember which channel is being used in which room.
Room Dimensions
Providing the information on the room dimensions can be done in either English
or metric system measurements. It does not alter the nature of the room correc-
tion being done now; rather, when these results are uploaded to the Audyssey
website, it provides Audyssey with an enormous database of actual measure-
ments in real rooms, along with pertinent data about those rooms. Audyssey
now has tens of thousands of these measurements, which enables them to im-
prove their algorithms over time.