weber 3500 - Manual (Page 23)

23
Step 16
Add base panel
You will need: Base panel.
Put the right side in and down, tilt and set the left side in
place. Figure 26.
Step 17
Install side panels
You will need: two side panels, and eight plastic buttons.
From the inside of the frame assembly, set the left side
panel in place between the side frame legs.
Notice that there are two sets of holes in each side panel.
Align the holes in the side panel to match the holes in the
left side frame legs. Push in the four plastic buttons.
Figure 27 (a).
Repeat with the right side panel.
Figure 26
Figure 27
(a)
Base panel
Left side
panel
top
bottom
Right side
panel