weber 3500 - Manual (Page 27)

Step 25
Complete accessory installation
You will need: Warm-Up Basket, warming rack, work table,
three tubing plugs, thermometer and a hammer.
Insert one end of the Weber Warm-Up Basket into the hole
in the right end of the lid and the other end into the slot in
the left end of the lid. Figure 38 (a).
Set the warming rack into the slots at the rear of the
cooking box. Figure 38 (b).
Set the work table onto the left side rails. Figure 38 (c).
Insert the thermometer into its holder. Figure 38 (d).
Insert the tubing plugs into the ends of the frame. To fully
seat the plugs, you may have to tap them lightly with a
hammer. Figure 38 (e).
Figure 38
(a)
(b)
(c)
(d)
(e)
27
Step 24
Install the accessory rack
You will need: accessory rack.
Rest the left end of the accessory rack on the base
panel. Figure 37 (a).
Insert the right hooks into the right side frame slots.
Figure 37 (b).
Raise the left end up and slide left hooks into the left side
frame slots. Figure 37.
Figure 37
(b)
(a)
Right side
frame
Left side
frame slots
Left hooks