Wasp Bar Code WLP 4170 CCD - Manual (Page 14)

Preamble Data Postamble
11
Setup & Configuration
—Preamble and Postamble
*Default
The 'Preamble' and 'Postamble' options are used to add prefix and suffix
characters to the bar code value. Up to 22 characters may be added for each
option separately.
Note: This example illustrates how data will be fo rmatted when each option is configured.
Data Stream Example
NOTE: For help in configuring these settings, consult the programming
steps on page 5.
Begin
Set Preamble
Set Postamble
Exit
Preamble
Postamble
Scan 'Begin'. Scan "Set Preamble" to program
preamble. Scan characters from the back cover flap
using the ASCII Table on page 36. Scan "Set" on the
back cover flap to end.Scan 'Exit'.
Scan 'Begin'.Scan "Set Postamble" to program
postamble. Scan characters from the back cover flap
using the ASCII Table on page 36. Scan "Set" on the
back cover flap to end.Scan 'Exit'.