Wasp Bar Code WLP 4170 CCD - Manual (Page 23)

20
(continued on next page) *Default
Setup & Configuration
—EAN-13
On/Off
Verify Check Digit
Begin
Transmit Check Digit
Exit
Option Alpha/Numeric Entry
(Back Flap)
Disable 00
Enable 01*
Disable 00
Enable 01*
Disable 00
Enable 01*
NOTE: For help in configuring these settings, consult the programming
steps on page 5.
The EAN/JAN-13 (European Article Number/Japanese Article Number) is fixed length and
is similar to the UPC-A symbology, but encodes a 13th digit. The nominal height for the
EAN/JAN-8 bar code is one inch.The reduced size is 80% of the nominal size.