Zhone Technologies 900 - Manual (Page 91)

Data Cards IMACS System Release 5.1.6 3-3
OCU-DP Card OCU-DP Card User Screens and Settings
3.3 OCU-DP Card User Screens and Settings
3.3.1 OCU-DP Card Main Screen
You must configure the OCU-DP Card for proper operation. This is done from the OCU-DP
Card Main Screen, which is shown in Figure 3-1. To go to this screen, highlight the desired
card in the System Main Screen and press <Enter>.
Figure 3-1. Typical OCU-DP Card Main Screen
The bottom highlighted line of this screen lists various actions that you can perform from this
screen. To perform an action, simply type the uppercase letter corresponding to the desired
action on this line. For example, to save your card option settings, press “s” to invoke the Save
command. Table 3-1 lists the actions you can perform from this screen, and Table 3-2 lists the
OCU-DP Card Main Screen parameters and available settings. These are also described in the
following paragraphs.