ZyXEL Communications NBG-419N - Manual (Page 37)

NBG-419N User’s Guide
37
C
H A P T E R
3
Introducing the Web
Configurator
3.1 Overview
This chapter describes how to access the NBG-419N Web Configurator and
provides an overview of its screens.
The Web Configurator is an HTML-based management interface that allows easy
setup and management of the NBG-419N via Internet browser. Use Internet
Explorer 6.0 and later or Netscape Navigator 7.0 and later versions or Safari 2.0
or later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled
by default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
Refer to the Troubleshooting chapter ( Chapter 31 on page 215 ) to see how to
make sure these functions are allowed in Internet Explorer.
3.2 Accessing the Web Configurator
1 Make sure your NBG-419N hardware is properly connected and prepare your
computer or computer network to connect to the NBG-419N (refer to the Quick
Start Guide).
2 Launch your web browser.
3 Type "http://192.168.1.1" as the website address.
Your computer must be in the same subnet in order to access this website
address.