Yamaha DIGITAL MIXING STUDIO N8 - Manual (Page 51)

Using the n8/n12 with Software Other Than Cubase
Owner’s Manual
51
English
Using the n8/n12 along with a multimedia application
To use the n8/n12 with a multimedia player such as Windows Media Player or Quick Time Player, you must make the
following settings:
■ Windows:
1. From the Start menu, select [Settings]
→ [Control
Panel] → [Sounds and Audio Devices]
The Sounds and Audio Devices dialog opens.
Click the Audio tab in the dialog, then select
“Yamaha Steinberg FW WDM Audio” as the Default
device for the Sound Playback column.
2. Click [Apply] to apply the settings, then click
[OK] to close the dialog.
3. Turn on the C-R SOURCE SELECT [DAW] switch
on the n8/n12, then adjust the monitoring level
for the control room.
■ Macintosh:
1. From the Apple menu, select [System
Preferences...] to display the “System
Preferences” window.
2. Click [Sound] on the window.
3. Click [Output], then select “Yamaha Steinberg
FW” in the “Choose a device for sound output”
field.
After you select “Yamaha Steinberg FW”, close the
window.
4. Select [Applications]
→ [Utilities] → [Audio MIDI
Setup] to display the “Audio MIDI Setup” window.
5. Click [Audio Devices] and check whether
“Yamaha Steinberg FW” is selected for “Default
Output:” and “Properties For:.”
Then, click [Configure Speakers].
For Windows Vista/7, select [Start] → [Control
Panel] → [Sound] → [Playback] → [Line Out
Yamaha Steinberg FW WDM Audio], then click [Set
Default].
NOTE