Zoom PD-01 - Manual (Page 8)

8
ZOOM Power Drive PD-01
Sound Samples
This section shows some actual setting examples and gives information on amplifier
settings.
Standard overdrive sound
Set the amplifier to clean sound without distortion. This will allow you to
easily switch between clean sound and overdrive. In this example, the
GAIN is set fairly high and the LOW range is given a boost, resulting in a
mild, warm sound. This is suitable for applications ranging from light rock
backing to solo play.
Boost sound emphasizing amp distortion
These settings emphasize the amplifier distortion. The key is the 10 o'clock
position of the GAIN control. The HIGH and LOW controls may be left in
the center. LEVEL can be adjusted to fit the amplifier distortion. The sound
of this widely applicable setup will differ considerably, depending on the
volume level setting at the guitar.