Zanussi VF550M - Manual (Page 29)

VIZIO VF550M User Manual
Version 3/4/2009 29
www.VIZIO.com
Watching a TV Program
Before you begin watching TV, please make sure that any cable, satellite or off-air antenna connections
are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge
protector.
1. Press the power button on the remote or on the side of the HDTV. The VIZIO logo on the
front will change from orange to white.
2. There are 3 options for selecting your programming:
a. If you are using an antenna or cable connected through the DTV/TV CABLE/ANTENNA
input, you can select TV directly by pressing the TV button on the remote, or by pressing
the INPUT button on the remote or on the side of the HDTV.
b. If you are watching broadcasts through a cable or satellite set-top box connected by an
HDMI cable, select HDMI directly by pressing the HDMI button on the remote, or by
pressing the INPUT button on the remote or on the side of the HDTV.
c. If you are watching broadcasts through a cable or satellite set-top box connected by a
Component (YPbPr) cable, select Component directly by pressing the COMP button on
the remote, or by pressing the INPUT button on the remote or on the side of the HDTV.
Note: You should be able to see a picture. If you do not, make sure that all of the HDTV connections are
secure and you have selected the correct video input source. Each press of the HDMI or COMP button on
the remote control will cycle through the available inputs. Press the button until the input associated with
the device you wish to view is shown in the Info box at the upper right corner of the screen.
3.
When using option 2a, press the Channel buttons on the remote or the CH ! or " buttons on
the side of the HDTV to change the channel. The Channel buttons on the side of the HDTV
and on the remote, control will not work if you are watching a program using HDMI,
Component, or AV (S-Video or Composite) inputs.