Attaching power supply – Zebra Technologies Zebra LP 2824-Z User Manual
Page 18
18
LP 2824-Z User Guide
980531-001 A
Getting Started
Attaching Power Supply
Attaching Power Supply
Check the power supply to make certain it is appropriate for your input voltage.
1.
Make sure the power switch is in the off position (forward).
2.
The DC power supply has a barrel connector on one end that must be inserted into the
power supply receptacle on the back of the printer.
3.
Insert the separate AC power cord into the power supply.
4.
Plug the other end of the cord into an appropriate AC electrical outlet.
Caution • Use the power supply that came with your printer. Never operate the printer
and power supply in an area where they can get wet. Serious personal injury could result!
AC Power
Cord
Power
Indicator
Power
Supply
Receptacle
Power
Supply
Power
Switch
Barrel
Connector
Plug Varies
by Country