Connecting an external decoder, Connecting the power supply cords, Connecting the ac power cord – Yamaha RX-V530 User Manual

Page 22: Ac outlets (switched), Voltage selector (china and general models)

Advertising
background image

18

CONNECTIONS

Connecting an external decoder

This unit is equipped with 6 additional input jacks (MAIN
left and right, CENTER, SURROUND left and right and
SUBWOOFER) for discrete multi-channel input from an
external decoder, sound processor, or pre-amplifier.

Connect the output jacks on your external decoder to the
6CH INPUT jacks. Be sure to match the left and right
outputs to the left and right input jacks for the main and
surround channels.

Notes

• When you select 6CH INPUT as the input source, this unit

automatically turns off the digital sound field processor, and
you cannot listen to DSP programs.

• When you select 6CH INPUT as the input source, settings of

“1 SPEAKER SET” on the SET MENU do not apply (except
for “1E MAIN Lv”).

VOLTAGE

SELECTOR

SWITCHED

50W MAX. TOTAL

AC OUTLETS

VOLTAGE SELECTOR

(RX-V530 General model)

Connecting the power supply
cords

Connecting the AC power cord

Plug in this unit to the wall outlet.

AC OUTLETS (SWITCHED)

U.S.A., Canada, China, Europe, Singapore and
General models .............................................. 2 OUTLETS
U.K. and Australia model ................................ 1 OUTLET
Use these outlets to connect the power cords from your
components to this unit. The power to the AC OUTLETS
is controlled by this unit’s STANDBY/ON (or SYSTEM
POWER and STANDBY). These outlets will supply
power to any source component connected to this unit
whenever this unit is turned on. The maximum power
(total power consumption of components) that can be
connected to the AC OUTLETS varies depending on the
area which it was purchasing.
China and General models ......................................... 50 W
Other models ........................................................... 100 W

VOLTAGE SELECTOR

(China and General models)

The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE
plugging into the AC main supply. Voltages are 110/120/
220/240 V AC, 50/60 Hz.

0103V530_9-19_EN(U)

12/27/01, 10:31 PM

18

Advertising
This manual is related to the following products: